Check it out! New Mainline Faucet Collections!

Water Systems

1/2 HP Shallow Well Jet Pump

  • 115/230 Volt AC (6.4/3.2 amps)
  • Submersible
  • Cast Iron Housing
  • Glass Reinforced Thermoplastic Impeller
  • 1" NPT Discharge

1/2 HP Convertible Jet Pump

  • 115/230 Volt AC (6.4/3.2 amps)
  • Submersible
  • Cast Iron Housing
  • Glass Reinforced Thermoplastic Impeller
  • 1" NPT Discharge

3/4 HP Shallow Well Jet Pump

  • 115/230 Volt AC (7.8/3.9 amps)
  • Submersible
  • Cast Iron Housing
  • Glass Reinforced Thermoplastic Impeller
  • 1" NPT Discharge

1/3 HP Remote Sink/Drain Pump System

  • Includes MLP72341 1/3 HP Cast Iron Sump Pump, Check Valve and Basin
  • Pump Features: 120 Volt (4.1 amps) Vertical Float Switch 1-1/2" NPT Discharge Handles 3/8" Solids Stainless Steel Impeller Stainless Steel Fasteners Passes Laundry Lint
  • Basin Features: Structural Foam Construction Corrosion Resistant 6 Gallon (22.7 L) Capacity, 15" x 13.5" 1-1/2" FPT Inlet 1-1/2" FPT Discharge & Vent Gasket Sealed, Air Tight Cover
  • Check Valve Features: Fits 1-1/2" or 1-1/4" Pipe Stainless Steel Clamps ABS Body

1/2 HP Cast Iron Sewage Pump/Basin Kit (18″ x 30″)

  • Includes MLP73501 1/2 HP Cast Iron Sewage Pump and Basin
  • Includes MLP79529 2” Rubber Boot Check Valve
  • Pump Features: 120 Volt (7.6 amps) Tethered Float Switch 2" NPT Discharge Handles 2" Solids Stainless Steel Vortex Impeller Stainless Steel Fasteners
  • Basin Features: Structural Foam Construction 30 Gallon (113.5 L) Capacity, 18" x 30" 4" Inlet with Snap-In Hub 2" NPT Discharge & Vent Premium Structural Foam Cover with 8 Bolt Configuration Air Tight, Molded, Reusable PVC Seal Pre-plumbed with 2" PVC - 30" Length

1-1/4″ ABS Check Valve with 1-1/4″ Rubber Boot

  • Weighted Flapper Valve
  • Stainless Steel Hose Clamps
  • Full Flow Design
  • Boot Dampens Water Hammer
  • 140°F Max Temp
  • Rated for 4.3 psi (10 ft of head)
  • Easy to Install

1/2 HP Cast Iron Sewage Pump/Basin Kit (24″ x 24″)

  • Includes MLP73501, MLP73501-25, MLP73511 or MLP73511-25 Pump and Basin
  • Pump Features: 120 Volt AC (7.6 amps) Includes Float Switch 2" NPT Discharge Handles 2" Solids Stainless Steel Vortex Impeller Stainless Steel Fasteners MLP73024 & MLP73026 Have 10' Power Cord MLP73024-25 & MLP73026-25 Have 25' Power Cord
  • Basin Features: Structural Foam Construction 45 Gallon (170.3 L) Capacity, 24" x 24" 2" NPT Discharge & Vent Gasket Sealed Liquid and Airtight Cover With 8 Bolt Configuration Built-In Anti Float Collar Prevents Basin From Floating Molded Torque Stops Prevent Pump From Turning Integrated 360° Lifting Handle Pre-plumbed with 2" PVC - 18" Length

1/2 HP Cast Iron Sewage Pump 15′ Power Cord

  • 120 Volt AC (7.6 amps)
  • Submersible
  • Stainless Steel Vortex Impeller
  • Includes Float Switch
  • 2" NPT Discharge
  • Handles 2" Solids
  • MLP73501 & MLP73511 Have 10' Power Cord
  • MLP73501-25 Has 25' Power Cord
  • MLP73501-50 Has 50' Power Cord

1/2 HP Cast Iron Sewage Pump 25′ Power Cord

  • 120 Volt AC (7.6 amps)
  • Submersible
  • Stainless Steel Vortex Impeller
  • Includes Float Switch
  • 2" NPT Discharge
  • Handles 2" Solids
  • MLP73501 & MLP73511 Have 10' Power Cord
  • MLP73501-25 Has 25' Power Cord
  • MLP73501-50 Has 50' Power Cord

1/2 HP Cast Iron Sewage Pump 10′ Power Cord

  • 120 Volt AC (7.6 amps)
  • Submersible
  • Stainless Steel Vortex Impeller
  • Includes Float Switch
  • 2" NPT Discharge
  • Handles 2" Solids
  • MLP73501 & MLP73511 Have 10' Power Cord
  • MLP73501-25 Has 25' Power Cord
  • MLP73501-50 Has 50' Power Cord

Archives