Bathroom
- Non-Diverter Hand Shower Trim
- W/ Ceramic Cartridge
- 1.8 GPM@ 60 PSI
- Seven Function Hand Shower
- W/6 Inch Shower Arm 7 Holder
- W/ Flange ,60" Metal Hose
- Slip Fit Diverter Tub Spout
- For Use with M410 Rough-In Valve
- ADA
- Watersense
- CUPC Certified
- Non-Diverter Hand Shower Trim
- W/ Ceramic Cartridge
- 1.8 GPM@ 60 PSI
- Five Function Hand Shower
- W/6 Inch Shower Arm & Flange
- W/ 60" Metal Hose & Shower Arm Holder
- Slip Fit Diverter Tub Spout
- For Use with M410 Rough-In Valve
- ADA
- Watersense
- CUPC Certified
- Non-Diverter Hand Shower Trim
- W/ Ceramic Cartridge
- 1.8 GPM@ 60 PSI
- Five Function Hand Shower
- W/6 Inch Shower Arm & Holder
- W/ Flange ,60" Metal Hose
- Slip Fit Diverter Tub Spout
- For Use with M410 Rough-In Valve
- ADA
- Watersense
- CUPC Certified
- Coordinates with Traditional, Continental & Centurion Suites
- Requires 410V, 410V-LS or 410V-PEX Valve
- 5 Function Showerhead
- Metal Lever Handle
- Brass Shower Arm & Flange
- Showerhead Max Flow Rate: 1.75 GPM @ 80 PSI
- To be used with ML1000W, ML1250W & ML1350W/ CUPC & WaterSense Certified
- 1.28 gpf / 4.8 Lpf high efficiency
- Chrome plated side flush
- Vitrified inside water tank
- Tank height: 14 1/5" (360mm)
- Elongated Comfort Height (ADA) Bowl/ CUPC & WaterSense Certified
- To be used with ML1990W Tank/1.28 GPF/ Side Lever/ Single Flush
- Tank Sold Separate
- Bowl height: 17 1/8" (435mm)
- Rough-in: 12" (305mm)
- Trapway: 2"â¢"⢠(51mm)
- Water Seal: 2 1/2"Â (64mm)
- MaP score >=800
- Standard 12"Â rough in
- Seat-mounting holes 5.5"Â (140 mm)
- Water surface 5.5"Â x 7.5"Â (140mm x 190 mm)
- Easy installation hole 1"x1/2"(25x13mm)
- Elongated Standard Height Bowl/ CUPC & WaterSense Certified
- To be used with ML1990W Tank/1.28 GPF/ Side Lever/ Single Flush
- Tank Sold Separate
- Bowl height: 15 3/16" (385mm)
- Rough-in: 12" (305mm)
- Trapway: 2"â¢"⢠(51mm)
- Water Seal: 2 1/2"Â (64mm)
- MaP score >=800
- Standard 12"Â rough in
- Seat-mounting holes 5.5"Â (140 mm)
- Water surface 5.5"Â x 7.5"Â (140mm x 190 mm)
- Easy installation hole 1"x1/2"(25x13mm)
- Round Front Bowl/ Standard Height/ CUPC & Watersence Certified
- To be used with ML1990W Tank/ 1.28 GPF/Side Lever/Single Flush
- Tank Sold Separate
- Fully glazed trap way
- Map Score >= 800
- Standard 12" Rough-In
- Siphonic Jet Action
- Seat-mounting holes 5.5"Â (140 mm)
- Water surface 5.5"Â x 7.5"Â (140mm x 190 mm)
- Easy installation hole 1"x1/2"(25x13mm)
- Bowl height: 15 3/16" (385mm)
- Trapway: 2"â¢"⢠(51mm)
- Closed front with cover
- Injection molded solid plastic construction
- Four molded-in bumpers
- Color matched Top Tite® plastic hinges
- Non-corrosive, top-tightening Hex-Tite® bolts & wing nuts
- Compliance: American National Standard Z124.5 (Commercial Heavy Duty)
- 3 Function Handshower
- Contemporary Slide Bar
- 72" Handshower Hose
- Shower Elbow
- Max Flow Rate: 1.8 GPM @ 80 PSI
- 100% Factory Pressure Tested
- Coordinates with Prediction & Madeline Valve Only Trims
- 3 Function Handshower
- Contemporary Slide Bar
- 72" Handshower Hose
- Shower Elbow
- Max Flow Rate: 1.8 GPM @ 80 PSI
- 100% Factory Pressure Tested
- Coordinates with Prediction & Madeline Valve Only Trims